home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload Trio 2 / Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO / dir34 / 1dtse122.zip / README.DOC < prev    next >
Text File  |  1993-07-27  |  3KB  |  62 lines

  1. *****************************************************************
  2.                 README.DOC
  3.  Disk Technician Factory Test for Seagate Drives Version 1.22
  4.   This test correlates to Seagate Disk Repair Center testing.
  5.  
  6. This document contains information about major changes which have
  7. been included in this new version.
  8. *****************************************************************
  9. TABLE OF CONTENTS:
  10.  
  11. 1.0   Most Drives Now Automatically Recognized and Tested.
  12. 2.0   Defective Media Locations Now Automatically Removed From
  13.       Service. 
  14. 3.0   User's Guide Now On Diskette -- How To Print A Copy. 
  15. *****************************************************************
  16.  
  17. 1.0   Most Drives Now Automatically Recognized and Tested.
  18.  
  19.       Virtually all Seagate IDE, SCSI, SCSI-1, SCSI-2, Fast
  20.       SCSI-2 and ST506/412 (MFM/RLL) drives will now be
  21.       automatically recognized and tested by Disk Technician
  22.       Factory Test For Seagate Drives version 1.22.
  23.  
  24.       This will greatly enhance the value of Factory Test in
  25.       eliminating No Problem Found (NPF) drives in the field.
  26.  
  27.       Please refer to Appendix A in the file MANUAL.DOC
  28.       (included in the Factory Test software files) for a
  29.       complete listing of eligible drives, plus the matching
  30.       controller or adapter recommended for testing each drive.
  31.  
  32. 2.0   Defective Media Locations Now Automatically Marked Bad.
  33.  
  34.       Many Factory Test users requested that we add the ability
  35.       to automatically mark-out any media defects detected by
  36.       Factory Test's "Quick Test" and/or "Media Certification."
  37.  
  38.       Version 1.22 adds this important feature.
  39.  
  40.       Once testing has finished, any media defect locations
  41.       identified by Factory Test (as shown in the "Quick Test
  42.       Report" and/or "Media Defect Report") can be automatically 
  43.       marked "bad" and removed from service. To do this, simply 
  44.       high-level format the drive under the desired operating 
  45.       system (DOS, UNIX, Macintosh, etc.).
  46.  
  47. 3.0   User's Guide Now On Diskette -- How To Print A Copy.
  48.  
  49.       In order to put changes into effect more rapidly, the
  50.       User's Guide is now contained in a file called MANUAL.DOC
  51.       and is included on the Factory Test diskette. 
  52.  
  53.       To print a copy of the User's Guide, type the following
  54.       from the system prompt:
  55.  
  56.     COPY  A:\MANUAL.DOC  PRN
  57.  
  58.       and then press the Enter key (be sure the printer is on 
  59.       and connected).
  60.  
  61. *******************************END*******************************
  62.